Opticon LA-115 Bar Code Wands and Opticon LA-119 Bar Code Wands
Toughest wand available
The Opticon MSH-115/119 is built to take a real beating. Experience shows that cables are the most vulnerable part of a bar code wand. The double-spiraled, "High-Flex" cable greatly reduces failure rates. This durable cable is designed to withstand 2 million 90 bends with a one pound weight.
A wand tip must scan millions of labels and withstand accidental drops to the floor. The Opticon MSH-115/119’s synthetic ruby ball tip is second only to diamond in hardness and is spring loaded to dampen impact. Self-cleaning, the ruby ball tip assures consistent read performance by protecting the optics from dust and dirt. The extruded, seamless, stainless steel case withstands harder knocks at the workstation than competitive wand cases.
Performs in Extreme Weather
The Opticon MSH-115/119 is designed to operate in any environment, from –5 to +120 F. Opticon’s wide temperature range may mean the difference between a working or nonworking bar code wand in extreme weather conditions.
Reads Under Intense SunlightIdeal General Purpose Wand
A special optical bandpass and electrical filter ensures that the Opticon MSH-115/119 will read bar codes in direct sunlight or under strong fluorescent lighting.
The Opticon MSH-115/119 is designed to read the widest range of bar codes, including both marginal quality dot matrix and high density labels. Opticon wands are available with an assortment of connectors that adapt to your existing hardware.
- Seamless, stainless steel case
Rugged case withstands drops and rough handling
- Double spiraled, high-flex cable
Cable lasts longer
- Ruby tip
Hard material resists scratches that could affect reading ability
- Spring loaded tip
Protects tip if wand is dropped
- Self-cleaning ball tip
Protects optics from dust and dirt, ensuring consistent performance.
- Wide variety of connector styles and pinouts available
Will plug into your current equipment
- High depth-of-field (MSH-115)
Improve reads on laminated bar codes
- Reads all symbologies
Will read your barcodes
- Superior reading ability
Reads all bar codes even poorly printed dot matrix labels
- Wide temperature range
Can be used in harsh environments
Opticon MSH-115/119 Specifications
Red (I = 660nm) Infrared (I= 940nm)
4, 6, 7.5, 10 and 15mils
Depth of Field
MSH 115= 0 to 50 mils (1.25mm) MSH 119= 0 to 40mils (1.0mm)
Print Contrast Ratio
Scan Velocity (7.5mil label)
MSH 115= 4 to 40"/sec.
MSH 119= 2 to 80" /sec.
Ambient Light Rejection
3 kilolux fluorescent light; 30 kilolux incandescent
No damage after 5 foot drop from any position onto concrete surface.
Withstands over 2 million 90 angle bends at 1 pound tension.
0.3mA (LED off)
Open collector; Black= high logic level
50 discharges max. / 15KV
Separate case and signal grounds
|Custom options include separate LED enable input.|
Extruded Stainless Steel
5.5 x 0.5" (diam)
100g (3.5 ounces) w/o cable
Synthetic ruby ball
Part # 28-WAND1-01
White desktop stand
MSH-115 (reads laminates)
LED Light Source
MSH-119 (Reads Paper Labels)
LED Light Source